www.tacworldwide.com/openhouse ]]> 2008-09-05T14:50:34-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/sby/mnu/829080424.html text 2008-09-05T14:50:34-07:00 http://sfbay.craigslist.org/nby/mnu/829009709.html Department: Operations
Reports to: Director of Operations

SUMMARY:

We are seeking an RF/Microwave System/Component Engineer with a thorough knowledge of Microwave components as well as development background with digital phase lock loop systems.. This position is responsible for the new product introduction and qualification of new products and the manufacturing support of existing microwave synthesizer products. The successful candidate will be required to analyze a design and characterize performance prior to any hardware build. In addition the engineer must provide data showing proof on concept of the assigned design task.

Although capable of working alone on tasks this senior position requires the engineer to organize and direct from time to time a small group of technicians, assemblers, electrical and mechanical engineers toward a successful completion of an assigned product introduction or manufacturing project. This includes detailed task layout, tracking individual and group performance against project task as well as estimating labor and material expenditures. As project lead you are also expected to make project change recommendations to management in order maintain the project’s schedule, cost and technical goals.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Directs electronics engineering and technical personnel in new product introduction and fabrication of testing and test control apparatus and equipment ensuring that products are tested for quality according to schedules and standards.

Determines conditions under which tests are to be conducted and sequences and phases of test operations. Analyze and interprets test data and prepares technical reports for use by electronic engineering and management personnel.

Confers with scientific, engineering, and technical personnel to execute and implement test procedures. Interface with personnel to resolve testing problems such as product or system malfunctions, incomplete test data and data interpretation.

Directs and coordinates electronic engineering activities concerned with procurement, installation, and calibration of instruments, equipment, and control devices required to test, telemeter, record, and reduce test data.

Writes code for computer software and hardware to conduct tests on electronic products and systems. Creates test manufacturing routers describing type and sequence of tests to be performed on products by technicians. May administer quality systems within the department as defined by Microsource’s Quality requirements.

Completes all phases of software release for automated test.

QUALIFICATIONS:

- Education: Bachelor’s debree (B.S.) in electronics, computer science, or related disciplines; 3-5 years related experience and/or training; or equivalent combination of education and experience.
- Ability to read, analyze and interpret scientific, technical, financial, legal documents
- Ability to write and effectively present presentations and information to senior management or customers.
- Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations. Ability to apply mathematical operations to such tasks as electronic data gathering, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory and factor analysis.
- Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

Phone: 707-573-4310
]]> 2008-09-05T14:03:31-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/nby/mnu/829009709.html text 2008-09-05T14:03:31-07:00 http://sfbay.craigslist.org/sby/mnu/828868127.html ]]> 2008-09-05T12:35:23-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/sby/mnu/828868127.html text 2008-09-05T12:35:23-07:00 http://sfbay.craigslist.org/pen/mnu/828672386.html
Solid positions. Unlike others, our unique mix of aerospace, military, and medical customers has provided us continuous growth over the past 5 years serving many fortune 500 companies.

We produce high precision/tight tolerance gears and our markets are growing. American Precision Gear Company has been in business since 1954. We are a solid, progressive, ISO certified company. A place to be for career advancement/opportunity.

Visit our website: www.amgear.com

Join our team.

Fax or E-Mail resumes to:
Anthony Bennett
amgear@Pacbell.net
650-595-0388 (fax)]]> 2008-09-05T10:39:03-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/pen/mnu/828672386.html text 2008-09-05T10:39:03-07:00 http://sfbay.craigslist.org/eby/mnu/828669390.html
Department: Operations

Overall responsibility: Production & Material planning / Admin assistant



Key areas of responsibility:
-Production planning & Materials control
-Computer tasks to include MS-Excel & MS-Word
-PO placement, material receipt, and other processing needs
-Shipping & receiving process
-Materials consign coordinate
-Support accounting requirements as needed
-Manage daily communications with CMs in Asia
-RMA coordinate

Qualifications:
-Skills of MS-Excel , MS -Word, Adobe Acrobat
-Language: English & Mandarin
-Must be organized, dependable, detail oriented, and willing to learn

Location: Stevenson / Fremont, CA

To Apply: Email your resume to alin@salutron.com

]]> 2008-09-05T10:37:27-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/eby/mnu/828669390.html text 2008-09-05T10:37:27-07:00 http://sfbay.craigslist.org/nby/mnu/828656630.html Applicants must be:
Willing to work to high quality standards
Professional.
Punctual.
Reliable and willing to work overtime.
Able to work with minimal supervision
Knowledgeable in all aspects of metal forming:
• Hydraulic 120 ton shear
• Hydraulic press brake
• Layout
• Working knowledge of math skills
• Experienced working with stainless steel
• Able to read & understand blue prints
Duties will include: punching, plasma cutting, sawing, drilling, tapping, de-burring
Benefits include:
Medical, vision, 401K, quarterly bonuses, and holiday pay

]]> 2008-09-05T10:30:13-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/nby/mnu/828656630.html text 2008-09-05T10:30:13-07:00 http://sfbay.craigslist.org/eby/mnu/828641058.html
Founded in 1998, our passion for what we do has helped us become a profitable, rapidly growing company with facilities throughout the U.S. and Europe. We have over 700 employees and 2008 revenues on track to exceed $200M. With double digit growth year over year for the last several years and a worldwide market opportunity of $80B we still have lots of room to grow.

You may already know us as “The World’s Largest Print and Poster Store.” There are four core brands in our corporate portfolio, Art.com, AllPosters.com, Poster.de, and Artistrising.com that are changing the way people buy and discover art online.

We value innovation, creativity and results from our employees. You can expect challenging, rewarding work, competitive salaries, great benefits, and tremendous opportunities for career growth.

We have some serious growth plans and if you have the same in your career plan, we’d love to talk with you.


SR. MANUFACTURING LEAD

This position will assist with supervising all aspects of the framing operations, help establish and prioritize objectives, enforce deadlines and build commitment to goals, recommend and implement solutions for changes and improvements.


RESPONSIBILITIES:

• Directs and reports on production facility to ensure that daily productivity metrics and objectives are met

• Understands standard operational and working practices, and ensures framing staff comply with standards

• Reports and compiles production data where necessary

• Carries out operational schedules and coordinates activities to ensure quality of product meets standards

• Resolves operational problems to ensure minimum costs and prevent operational delays

• Contributes to manufacturing through hands on participation

• Participates in inspecting production machines and equipment to ensure specific operational performance and optimum utilization

• Determines when raw materials need to be ordered and in what quantities. May also place orders as required.

• Maintains facility needs where applicable

• Maintains a variety of records related to the above duties

• Maintains flexibility to work any shift or weekend required of the position


REQUIREMENTS:

• Minimum 1-2 years of previous related supervisory experience

• Background in distribution/warehouse or production environments a must

• Basic reading, writing, alphabetizing, and numeric ability

• Able to lift and carry 50 pounds and work any shift

• Familiar with basic web navigation, Excel, and Word

• Experience in lean-manufacturing and the visual factory principals a plus

• Familiarity with “Kaizen” and process flow events is a plus


BENEFITS:

We offer a competitive benefits and incentive package which includes the following:

•Medical, Dental and Vision Plan
•401(k) Plan with company match
•Life Insurance/AD&D with Voluntary Supplemental coverage
•Short and Long Term Disability
•Flexible Spending Account
•Paid Time Off and Company Paid Holidays
•Employee Discount Programs
•Company Sponsored Events and Activities


Work hard, have fun, and thrive with us!

Please include SALARY HISTORY with your resume and follow the link below to our Corporate website (PLEASE APPLY FOR THE "SR. MANUFACTURING LEAD" POSITION):
http://corporate.art.com/careers.aspx, OR, you can email your resume to jobs@art.com


Thank you for your interest in our company and we encourage you to visit one of our sites:

Art.com
AllPosters.com
Poster.de
Artistrising.com ]]> 2008-09-05T10:21:17-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/eby/mnu/828641058.html text 2008-09-05T10:21:17-07:00 http://sfbay.craigslist.org/sby/mnu/828546664.html When: Wednesday, September 10th, 2008 from 10:00am-2:00pm

Where: Kelly Services, 2025 Gateway Pl, Suite#156, San Jose 95110
(Across the street from the Double Tree Hotel near San Jose Airport)
Love your job

As the world’s premiere staffing service, Kelly Services® has 60 years of experience putting people just like you to work with the world’s most well-respected companies.

Kelly Services is currently hiring for these positions:


• Medical Device Assembly
• Electro-mechanical Assembly
• Manufacturing PCB Boards
• Soldering
• Basic Computer Skills
• Warehouse/ Light Industrial
• Customer Service (call center exp.)
• Order Puller
• Banking (must pass credit check)
• Copier/ Fax machine repair
• Assembly positions require good hand/eye coordination and MUST pass drug/background
• Front lobby receptionist


With a thorough network of offices in the Bay area, we provide employment flexibility for those seeking temporary, temporary-to-hire, or direct placement options.



Working with Kelly® has its benefits.


• Vacation and Holiday Pay
• Health Insurance
• Weekly Paychecks
• Direct Deposit/Payroll Card
• 401(k)
• Free Computer Training
• Free Computer Support
• Interview Training

For more information regarding these great opportunities call Kelly today!
Phone: 408-392-9369
Fax: 408-392-9437
Email Address: 1421@kellyservices.com


]]> 2008-09-05T09:27:50-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/sby/mnu/828546664.html text 2008-09-05T09:27:50-07:00 http://sfbay.craigslist.org/eby/mnu/828418698.html
Responsibilities: Plans, schedules and monitors the movement of materials. Negotiates and purchases all raw materials needed, then ensures delivery, payment, data entry of transactions, and maintains inventory at planned levels. Coordinates the manufacturing and purchase requirements for company 3rd party manufacturing facilities domestically. Communicates regularly to international companies that provide raw materials. Gathers quotations, examines bids and makes awards. Develops specifications for new contract orders. Reviews, selects and evaluates vendors, both primary and alternate, based on service, quality, custom compliance, ability to deliver, and price. Identifies purchase price and requirements of all active ingredients through a specific formula. Develops and ensures compliance with U.S. Customs. Controls a detailed demand forecast system with the sales organization to meet requirements vs. normal sales planning to support consignment and load-up of customer facilities.

Skills: Communication, time management, analysis, negotiation, project management, demand planning, forecasting, spreadsheets, inventory systems, and ability to multi-task.

Experience: 5-9 years in purchasing, forecasting, negotiation and inventory management systems. Previous experience working with third party manufacturers.

Knowledge: Logistics, warehousing and inventory management, demand planning and forecasting, MRP, import/export requirements, DOT requirements, packaging and chemical production.

Education: BA or BS in Business, with 5-9 years of related experience.

Other: APIC’s and HazMat desirable. Able to enter supplier and warehousing facilities. Able to wear personal protective equipment. Travel is approximately 5-10%.]]> 2008-09-05T08:11:11-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/eby/mnu/828418698.html text 2008-09-05T08:11:11-07:00 http://sfbay.craigslist.org/nby/mnu/828299936.html Call 758-4210]]> 2008-09-05T06:44:16-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/nby/mnu/828299936.html text 2008-09-05T06:44:16-07:00 http://sfbay.craigslist.org/eby/mnu/827949386.html ]]> 2008-09-04T20:44:09-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/eby/mnu/827949386.html text 2008-09-04T20:44:09-07:00 http://sfbay.craigslist.org/eby/mnu/827769156.html Galaxy Desserts, the renowned European-style, all-natural desserts and pastries manufacturer, is seeking a goal oriented and results driven Process Manager/Engineer to join our Facilities Team and be directly responsible and accountable for assigned systems. You will work cross-functionally with the R&D and Production Management Teams to solve daily operation problems and develop long term solutions.

You will also be responsible for engineering for capital projects, system operational performance, reliability, cost control, and continuous process improvement. Excellent leadership and teamwork skills with a customer focus mindset are key success elements to this position. Demonstration of our Core Values: Delightful, Entrepreneurial, Successful, Service Oriented, Exceptional, Respect, Trust and Sustainable will be the basis for your success at Galaxy Desserts.

Responsibilities:
Advise R&D on estimated timelines, problem-solving and possible restrictions.
Work closely with R&D to release new product to Production.
Develop processes & procedures to optimize efficiency and minimize costs, while assuring that finished goods meet specifications.
Be fully accountable for preliminary production and assure initial orders are filled on schedule.
Establish labor and yield production standards.
Closely coordinate with other functions, such as QC/QA, safety, operations, maintenance.
Train personnel and prepare for timely transfer of production responsibilities to Operations Team.
Produce required and appropriate record-keeping and procedure manuals.

Minimum Requirements:
-5 years food processing responsibility with a primarily Latino work force.
-Dairy / ice cream manufacturing experience strongly preferred
-Project management/engineering responsibilities for a food manufacturing facility with HACCP and GMPs in place, with experience in process control solutions.
-Strong hands-on managerial skills including effective production floor management
-BS in Food Science, with emphasis on dairy.
-Effective written and verbal communication skills and excellent computer skills
-Willing to work as needed for plant which operates generally 18 hr X 6 day/week.
-Multi-lingual preferred (we speak English, Spanish, French, Mandarin and few more!)
-Cost accounting/statistical process controls/ Six Sigma training a plus

]]> 2008-09-04T18:06:50-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/eby/mnu/827769156.html text 2008-09-04T18:06:50-07:00 http://sfbay.craigslist.org/sby/mnu/827676732.html 2008-09-04T16:54:43-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/sby/mnu/827676732.html text 2008-09-04T16:54:43-07:00 http://sfbay.craigslist.org/nby/mnu/827621448.html
MAIN QUALIFICATIONS & OBJECTIVES

•Maintains CAPA logs/databases and assists in expediting the routing, approval and closure of CAPA records
•Supports and performs internal audits of company procedures and processes to confirm compliance with controlled procedures, regulations, and standards.
•Manages the internal audit system including the development of the company’s internal audit schedule and tracking/reporting of non-conformances
•Manages the approved supplier list and assists in the identification and assessment of new suppliers
•Manages the customer complaint system including the organization of complaint files and coordination of complaint evaluation meetings; assists with MDR/vigilance reports
•Manages the equipment files including calibration and preventive maintenance records
•Provides support for the Quality System during corporate audits, actively participating in department activities
•Assists with the activities of Document Control, including distributing and auditing controlled documents, maintaining electronic logs and directories, tracking and reporting on document training progress
•Assists with the management of an employee database to include position training requirements, training deficiencies, and training data entry
•Uses department databases to track and manage and control issued documents. Assign lot numbers, material part numbers, and various other document tracking numbers
•Organize, proofread and manage documentation for regulatory submissions
•Perform or assist in product release activities including history record review
•Effectively follows company’s standard operating procedures and policies
•Performs other quality system related activities as requested

EDUCATION, WORK EXPERIENCE AND PERSONAL CHARACTERISTICS REQUIRED:

•5+ years of Quality Assurance-related experience in the medical device or pharmaceutical industry required
•College degree in engineering, life science or physical science preferred
•Knowledge of ISO and FDA concepts and guidelines
•Auditing certification or experience required
•Strong communication, prioritization and organizational skills
•Excellent writing skills
•Analytical problem solving and organizational ability
•Strong interpersonal skills and ability to work with others in a positive and collaborative manner
•Demonstrated ability to work accurately, follow instructions/schedules/timelines and handle multiple priorities
•Ability to utilize multiple word-processing and database applications including MS Office applications Word, Excel, Access
•Works under minimal supervision
•Must be flexible and able to adapt to changes in priorities.
]]> 2008-09-04T16:13:32-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/nby/mnu/827621448.html text 2008-09-04T16:13:32-07:00 http://sfbay.craigslist.org/eby/mnu/827357391.html
6 Month contract to hire

Job description
Developing production equipment and tool design from concept to installation. Equipment/tools may be for highly automated production line, proof of principles, transitory phases, or product development/test. Designs will mix innovation with industry/company standards.
Work independently as well as work in small teams of engineers and designers with overall team work and collaboration as a priority
Support development and manufacturing builds and well as installation and sustaining needs.
Self-management and project management by utilizing and providing project status, schedule and priorities.
Hands-on problem solving from conceptual design through troubleshooting
Ensuring products meet company and regulatory requirements while processes follow company methods and standards.
Work with product development processes, including working with process owners to develop equipment functional specifications and providing documentation for equipment release/ hand-off.

Job requirements
BSME, MS preferred, with experience in mechanical systems design
Proficiency in Solid Modeling parts, assemblies and drawings, 4+ years of continuous SolidWorks and PDMWorks preferred.
Hands-on experience with equipment and tool design including: mechanisms, pneumatics, linear slides, material delivery systems and fixture design.
Ability to provide expertise in one or more of the following areas: equipment design, industrial automation, vacuum, fluid delivery, opto-mechanics, illumination, machine vision, FEA and/or material selection.
Utilize proper and best known design practices
Ability to provide first order analysis (example: thermal, stress and tolerance analysis)
An understanding of basic fabrication methods, principles and operations.
High self-initiative with efficiency in daily work practices.
A proven track-record of strategically and tactically completing engineering projects on time within a fast-paced environment, where team collaboration, multi-tasking, and decision making are required.
Good Communication skills to work with team, internal customers, contractors, consultants, and external suppliers.
]]> 2008-09-04T13:15:17-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/eby/mnu/827357391.html text 2008-09-04T13:15:17-07:00 http://sfbay.craigslist.org/eby/mnu/827343132.html
1. Evaluate all goods received from vendors:
a. determine if goods meet physical requirements: dimensions, correct components, workmanship, packaging, appearance.
b. determine if goods meet functional requirements: perform functional tests on sample of parts.

2. Receive acceptable goods into the inventory data base.

3. Evaluate all goods prior to shipment to customers by:
a. inspection and functional tests prior to placement to finished goods inventory
b. inspection and functional tests of repaired boards and assemblies
c. functional test and/or inspection of spare parts or subassemblies

4. Document results of QA evaluations:
a. Monthly report of acceptance rates
b. Monthly discrepancy report

5. Interface with vendors regarding QA issues.

6. Attend weekly production meeting.

7. Special projects as assigned.

This is a 20 - 30 hours / week job. The candidate should have QA or electronic test experience; good verbal and writing skills, and be competent with computer/ office / system applications.


]]> 2008-09-04T13:06:34-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/eby/mnu/827343132.html text 2008-09-04T13:06:34-07:00 http://sfbay.craigslist.org/scz/mnu/827293598.html
JOB RESPONSIBILITIES:

The QA Inspector performs in-process quality inspection of materials and sub-assemblies. The QA Inspector assists in third party inspections by meeting with inspectors and accompanying them through the facility. The QA Inspector also provides customer service by handling Field Corrective Action Requests and provides manufacturing with product failure information.

SKILLS REQUIRED:

•A high school diploma or GED required, plus one or more years of related experience or training.
•Must possess excellent communication and organizational skills. Fluency in English required, Bilingual in Spanish desirable.
•Experience in manufacturing environment and experience with quality assurance is preferred.
•Ability to solve complex problems and recommend solutions and/or resolve complex situations.
•Must be able to effectively interact daily with customers, third party inspectors, sales/manufacturing/purchasing and other departments within the organization.
•Must have a working knowledge in Excel, Outlook, and Word.

]]> 2008-09-04T12:37:15-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/scz/mnu/827293598.html text 2008-09-04T12:37:15-07:00 http://sfbay.craigslist.org/eby/mnu/827213786.html
Nordic Windpower offers an opportunity to work in a fast-paced, rapid-growth, start-up environment with a dedicated and seasoned team motivated to excellence in the wind industry.

Additionally, we offer:
• Competitive compensation and benefits
• 401(k) with company matching
• Pre-IPO Stock Options

We currently have an outstanding opportunity for an experienced SENIOR PROJECT MANAGER responsible for driving, coordinating, and managing significant, high-profile projects end-to-end. As part of the customer facing team, this position will directly affect the image of professionalism and quality in the eyes of the customer as well as the customers’ agents and contractors. This position offers the unique opportunity to have a broad scope of responsibility and involvement and will make a tangible, direct contribution to the success of the company.

This highly visible role will report directly to the COO as a key member of the manufacturing team and will work with all levels throughout the company.

This position will function as a project coordinator across departments, teams, and geographic locations while maintaining focus on the key, critical paths, deliverables, and timelines; therefore the ideal candidate will have demonstrated leadership and team building skills as well as highly developed communication and organizational skills.

This position may be based in either Berkeley, California or at our manufacturing facility in Pocatello, Idaho. Some travel will be required.

RESPONSIBILITIES

• Working with internal departments including supply chain, engineering, operations, sales, and service, as well as external companies, manages all customer-related projects from sales turn over to commercial operations; maintains and encourages customer-centric focus at all times.
• Develops and maintains all project schedules and manages all tasks; identifies project requirements, resources, milestone criteria, and task dependencies to create and manage project schedules.
• Identifies all issues and delays affecting critical path; seeks and proposes opportunities to gain back project time.
• Ensures issues are resolved in a timely manner by appropriate team members; escalates issues as necessary and follows to resolution.
• Tracks all customer change order requests, quotes, billing, receivables and payments; develops and maintains a customer coordination memo system to track customer communications.
• Facilitates all communications for status updates and risk management; may lead project meetings; manages expectations; seeks up-sell and risk avoidance opportunities.

QUALIFICATIONS

• Bachelor’s degree is required; Engineering degree preferred.
• Strong project management skills coupled with 8-10 years of related experience in project management, product management and/or product development. PMI Certification preferred.
• Previous project management experience in the wind turbine industry is highly preferred.
• Experience as an EPC Project Manager or experience managing EPC contracts is preferred.
• Related industry experience required; wind turbine industry experience preferred.
• Strong team building skills and ability to work with people at all levels both individually and as part of a team; can-do/will-do attitude is essential.
• Strong technical, analytical, and negotiation skills; excellent interpersonal, and problem-solving skills; excellent written and verbal communication skills; attention to detail is essential.
• Proficient in using Microsoft Project, Power Point, Word and Excel.
• Motivated and driven to achieve high-quality results.
• Able to leap tall buildings in a single bound.

TO APPLY

Please email your resume and cover letter to Project.Manager@nordicwindpower.com.

MEGAWATT-CLASS. PROVEN IN SWEDEN, READY FOR THE WORLD. nordicwindpower.

]]> 2008-09-04T11:50:00-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/eby/mnu/827213786.html text 2008-09-04T11:50:00-07:00 http://sfbay.craigslist.org/pen/mnu/827108851.html
The Production Supervisor will report to the Plant Manager and will be responsible for understanding the full Energy Storage System (ESS – the vehicle battery pack) manufacturing progress. This person will be heavily involved in establishing a new production shift and validation of the equipment and processes. The Production Supervisor provides hands-on support, leadership, and direction to a manufacturing team.
Responsibilities
• Drive manufacturing team to achieve established targets for daily going rate (DGR) and on-time shipments (OTS).
• Hire, coach, lead and develop team members. Conduct team member training.
• Manage and supervise approximately 10 - 30 hourly production team members.
• Monitor metrics and Key Performance Indicator's (KPI's) to assess productivity and cost management.
• Assist with and lead production planning activities.
• Assess and analyze current practices and make recommendations for improvement.
• Partner and Coordinate with Engineering, Maintenance, and other external departments to resolve issues and concerns.
• Enforce proper material management procedures.
Requirements
• Prior management experience of similarly sized manufacturing team.
• Hands-on experience with electro-mechanical assembly.
• The ideal candidate is analytical, detail-oriented, self-motivated, able to pro-actively communicate with all employees and works well in a fast-paced multi-cultural environment.
• Experience with SAP or other ERP systems and the ability to perform simple transactions and data look-ups.
• Experience with process improvement methodologies to improve efficiency and effectiveness.
• Excellent verbal and written communication skills with strong interpersonal skills.
• Committed to continuous improvement.
• Well organized.
• Ability to work well under pressure, manage competing demands and meet tight deadlines with strong follow through.
• Good understanding of mechanical and standardized processes.
• Ability to use problem solving methods and techniques to successfully and efficiently resolve problems.
• Ability to foster a close working relationship with team members and management.
]]> 2008-09-04T10:50:22-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/pen/mnu/827108851.html text 2008-09-04T10:50:22-07:00 http://sfbay.craigslist.org/sfc/mnu/827053868.html
Zola Acai is a venture backed startup with a line of juices that are among the fastest growing in the domestic Superfruit juice category. Our juices are made from antioxidant packed Açaí berries grown in the Amazon Rainforest.

Opportunity:

We are currently looking for a Director of Operations to help us manage and further refine our growing and production and logistics processes. This person should have significant operational experience in a successful consumer packaged goods company. Ideally, this person would have experience managing both material sourcing/purchasing and transportation logistics.
Our Director of Operations will at times wear a variety of hats, but in all roles will need to bring analytical rigor, detailed focus, and structure to an organization that is still in the process of transforming itself from a scrappy, boot strapped startup to a more mature, process-driven organization. This person will play a key role in helping us develop the systems, organization, and processes needed to successfully support our continued strong growth in the marketplace.

Skills/Requirements:

•Oversee the production process, from internationally sourcing raw materials to fulfilling customer orders, and ensure that all of the little things are done properly along the way
•Production forecasting with input from sales department.
•Position relies on experience and judgment to plan and effectively schedule in a multi-task, faced paced, start-up environment. A wide degree of creativity and latitude is expected.
•Exceed both internal and external customer’s expectations
•Experienced with MAS 200 or similar accounting systems
•Detail-oriented with strong critical reasoning and analytic skills
•Experienced with packaged food production distribution and logistics
•Experienced with negotiating volume-based purchasing and logistics contracts
•Strong academic credentials, degree/certificate in Ops, and/or MBA are a plus
•Good sense of humor; must play well with others
•Supervise current Operations Manager
•Reports to the VP of Finance & Operations]]> 2008-09-04T10:19:11-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/sfc/mnu/827053868.html text 2008-09-04T10:19:11-07:00 http://sfbay.craigslist.org/sby/mnu/826834298.html 2008-09-04T08:08:29-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/sby/mnu/826834298.html text 2008-09-04T08:08:29-07:00 http://sfbay.craigslist.org/scz/mnu/826279048.html
This is a repost of the position we posted in June. We hired one part time person who is still doing well, and one full time person who had to leave the area for personal reasons. It is the same position, but we are being a little more specific about our requirements. We really do need people who can follow instructions and who have experience in electronic or electromechanical assembly.

If you are a self-starter who works well with minimal supervision and gets satisfaction from building a superior product, we invite you to submit a resume.

Please include a letter describing your background, training and interests in electronics and why you think you would work well doing demanding work in a small company.]]> 2008-09-03T19:24:13-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/scz/mnu/826279048.html text 2008-09-03T19:24:13-07:00 http://sfbay.craigslist.org/pen/mnu/826127447.html
This position will be a Temporary Full-Time Role with Hourly rate. There is a possibility it may become a permanent role in the future.


The Inventory Analyst is responsible for the following:

Monthly Duties:

1. BOH/EOH estimate of inventory (using historical trends, MRP output, and Master Schedule for future requirements)
2. Analysis of product line inventory status (raw, wip, fgi, other)
3. Calculate turns, by customer product, for current and upcoming month
4. Calculate expected corporate turns for upcoming month
5. Analyze & report excess and obsolete, and summarize by customer product
6. Maintain metrics to track all of the above.
7. Make presentations to management about the status of inventory.


Routine Duties:
1. Provide recommendations for purchasing strategies, inventory disposition, and inventory management
2. Bird dog PO’s from a macro level for over-commits, cancels and push outs
3. Prepares/presents metrics review for Materials.
4. ECN control & disposition follow up for any affected material.
5. Maintains inventory programs such as safety stock, alternative freestock, etc.
6. Management of the Kan Ban program to insure proper levels, and accurate backflush, & resolution of any issues
7. Resolution of inventory issues that arise. (Warehouse, WIP, Transactions, etc.)

Preferred Requirements:

1. 4 year Degree, preferably accounting
2. Cost accounting experience
3. Manufacturing experience as Scheduler or Planner
4. Previous experience as Inventory analyst (hard to locate)
5. APICS certified



]]> 2008-09-03T17:27:31-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/pen/mnu/826127447.html text 2008-09-03T17:27:31-07:00 http://sfbay.craigslist.org/sby/mnu/826065307.html Expresso Fitness has revolutionized the indoor exercise industry by blending eye-popping virtual reality with a classic cardio workout. The result is a truly unique experience that continues to capture the interest of clubs and members alike. This is a different kind of fitness company, known for its fusion of diverse disciplines. Mechanical engineers innovate alongside game programmers. Seasoned managers work with gifted artists. Together, the team is delivering an unprecedented experience that completely redefines fitness.

The company’s head quarter is in Sunnyvale with majority of manufacturing operations on site. Expresso Fitness also works closely with a number of suppliers and contract manufacturers world wide. We are currently seeking to fill an immediate open position for a Manufacturing Engineer (level II to III). This is a full time position with benefits.

Job Scope:
1. Make changes for improvements in cost, quality and manufacturability of released products and NPI (new product introduction)
a. Examine current product design and identify areas for cost down opportunities.
b. Propose and/or evaluate design modifications (including second source proposals) and drive ECR (engineering change request) /ECO (engineering change order) process.
c. Develop, evaluate, and improve manufacturing methods.

2. Define design constraints per current contract manufacturer environment and drive manufacturability feedback process for next product design:
a. Represent Operations Department in engineering design review meetings.
b. Specify and review engineering documentation.

3. Perform technical capability evaluation for future contract manufacturer selection process for next generation and new products.

4. Provide engineering guidance for Customer Service and Quality to help resolve complex problems.
a. Develop Configuration tracking system / notification of changes to Customer Service.

5. BOM development for manufacturing use.


Requirements:
• B.S. in Mechanical Engineering or higher with 5+ years of relevant experience
• Experience in 3D-Cad modeling design preferred. Solid Works experience strongly desired.
• Requires strong skills in change management, problem solving, communication and documentation, customer orientation, product technology, global business perspective, personal effectiveness, project management, team skills and quality.
• Requires demonstrated ability in cross functional leadership and influencing skills. Self motivated and strong hands-on approach to problems. Ability to design for serviceability and manufacturability.

For more information about the company, please check out http://www.expresso.com

Interested applicants, please make sure to send a copy of your resume when responding to this posting.

Thank you!
]]> 2008-09-03T16:42:40-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/sby/mnu/826065307.html text 2008-09-03T16:42:40-07:00 http://sfbay.craigslist.org/sby/mnu/826026460.html
As Manufacturing Engineer – Automation, you will work in a hands-on, start-up environment to create and develop bench-scale manufacturing processes for polymer-based electromechanical devices, and develop those processes into scalable high-volume practices. Elements include the fabrication, assembly and testing of products and manufacturing equipment, including motion control, vision systems, precision screen printing, and electro-mechanical automation. You will interact with in-house engineers and technicians, as well as manufacturing partners in the development of equipment, processes, and controls.

PRIMARY RESPONSIBILITIES

• Develop, document, and maintain manufacturing processes, systems, and equipment to optimize capacity, cost, and quality of products produced.
• Implement bench- and prototype-scale manufacturing lines to support internal development activities. Implement upgrades and changes as new designs and techniques are introduced.
• Work to develop promising processes into scalable, high volume manufacturing processes.
• Develop, document, and implement automated manufacturing processes including automated test and QA/QC for materials, process, and product verification.
• Manage external resources to develop scalable volume manufacturing processes.
• Establish processes to isolate failures, identify root causes, and implement corrective action to improve product performance and yield.
• Provide training/support for production assemblers, operators, and technicians on an ongoing basis.


QUALIFICATIONS

• BS or MS in Mechanical Engineering, Industrial Engineering, or a related technical field.
• 5+ years successfully developing electro-mechanical automation for manufacturing and testing components in consumer, medical, and/or industrial applications. Experience in both process and manufacturing engineering highly desirable.
• Experienced in designing, developing, and maintaining equipment with motion control and vision systems.
• Knowledge of coding languages for automation equipment; Visual Basic a plus.
• Practical experience in defining, designing, fabricating, and implementing tooling, fixtures, equipment, and manufacturing processes.
• Experienced integrator of multi-step processes including in-process quality assurance, data logging, process documentation, and conformance to ISO 9000 requirements.
• Able to work with interdisciplinary teams to manage and execute projects in engineering, materials development, electronics, testing, marketing, and business development.
• Knowledge and experience with roll-to-roll processing, precision screen printing, laser cutting, packaging, and automated pick-and-place are a plus.
• Strong analytical, organizational, communication (both written and verbal), presentation, and interpersonal skills required.
• Success in implementing 6 Sigma, Lean Manufacturing, ISO 9000, and/or TQM desirable.
• Must be a self-starter able to complete projects against an aggressive timeline.
• Able to multi-task and work productively in a start up environment.
• Value and work with a diverse group of individuals.
]]> 2008-09-03T16:15:09-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/sby/mnu/826026460.html text 2008-09-03T16:15:09-07:00 http://sfbay.craigslist.org/eby/mnu/826023276.html able to work any shift. Must have experience using machinist hand
tools and precision measuring instruments. Quartz or ceramic machining
experience a plus. Great company with outstanding benefits!
APPLY IN PERSON 9:30am-4pm, M-F.
Quality Quartz Engineering, Inc.
2357 Industrial Parkway West, Hayward
EOE M/F]]> 2008-09-03T16:12:51-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/eby/mnu/826023276.html text 2008-09-03T16:12:51-07:00 http://sfbay.craigslist.org/eby/mnu/826016024.html Join our history of success!

Auto-Chlor System is a national leader in the Restaurant/Hospitality industry. We provide the latest in sanitizing equipment and cleaning products to our clients. We are known for our exceptional level of services and products. We service clients locally, regionally and nationally. Become part of our 70+ years of nationwide success.

Position,
We are seeking both experienced and entry level sales professionals for protected territories. Our successful sales representatives have the ability to grow into our local and regional leadership positions. As an Auto-Chlor sales professional you will be developing proposals for clients in regards to their sanitizing needs and helping them stay compliant with local health department regulations. You will be driving the sales development in your territory. Entry level candidates will receive extensive training on our equipment, products and the sales. Experienced sales candidates will be given a protected territory to manage upon start of position.

Key Responsibilities
Responsibilities include prospecting through networking, cold calling, generating and presenting proposals and closing new business. · Generating revenue by developing market potential through; lead generation, networking, recommending products/services, and closing sales. · Developing sales strategies, techniques, and tactics based on customer feedback and the market environment. · Collaborating with management to achieve monthly sales targets with close attention to increasing market share and key account growth. · Working in an assigned territory to identify new business opportunities, meet with decision-makers to analyze their needs, and identify areas for Auto-Chlor System to provide value added service improvements. · Maintaining current knowledge of Auto-Chlor System products and cultivating & developing professional referral channels.

Requirements
Experienced, successful candidates should be able to demonstrate a history of progressively improving sales results and earnings history. Qualified candidates must have demonstrated ability to overcome obstacles, achieve sales goals, and have the ability to articulate ideas clearly and concisely in a variety of settings. The ability to work in a high-energy, team environment is strongly preferred. Non–experienced candidates need to show a drive to start a successful sales career and the willingness to learn. Familiarity with the Restaurant/Hospitality industry is a plus.

Compensation
Compensation includes a base salary, commission and company vehicle. You have the ability to earn over six figures. Additionally, our recognition programs allow top producers to win gifts and travel opportunities with their peers based on achieving a predetermined level of performance. Benefits package includes Med/Den/Vis/Profit/401k and much more..

To Apply:
Please submit resumes to andrews@autochlor.net or mail to: 2707 Wood Street, Oakland, CA 94607 or 3400 Thomas Road, Santa Clara, CA 95054. Fax to: 510-663-9753 or 408-970-9466.

Please visit us on the web at www.auto-chlor.com or www.autochlorsystem.com

Auto-Chlor System is an Equal Opportunity Employer commited to a diverse workforce. M/F/D/V

Key Words: Route Manager, Sales Representative, Service Technician, Territory Manager, Driver, Delivery, Installation, Food Service Related Industries: Pest Control, Water, Uniforms, Food Service, Shop, Medical Devices, Hospitality, Alarm Systems, Telecommunications, Hospitality, Restaurant, Maintenance, Leasing, Retail. Key Companies: ADT, TYCO, BAY ALARM, COVO, AT&T, SYSCO, ECOLAB, TARGET ]]> 2008-09-03T16:07:39-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/eby/mnu/826016024.html text 2008-09-03T16:07:39-07:00 http://sfbay.craigslist.org/sby/mnu/825984738.html A fast-growing engineering company seeks a Shipping and Receiving Supervisor.


Job Responsibilities:
• Lead the shipping and receiving team and assume ownership of all income inspection activities.
• Conduct and improve gage R+R.
• Cross train at final inspection.
• Conduct Measurement System Analysis and drive continuous improvement.

We are looking for:

* Solid shipping/receiving experience and computer skills.
* Good measurement skills, experience with measurement devices and ability to read/interpret standard print dimensions and tolerances. An inspection background is highly preferred; knows how to read drawings.
* Supervisory experience, ability to work in multicultural environment, decision-making skills, ability to work under pressure and organize workflow more effectively.
* Must be very detail-oriented and hands-on, a good leader, quick in response and works well in constant change.
* Able to lift 50 lbs.
* Speaking Vietnamese is a big plus.



Lin Engineering is an Equal Opportunity Employer. We provide a full benefits package, including 100% company paid health/disability/life insurance, 401(k), ESOP as well as other profit sharing programs. Act today and join our team!

A resume and cover letter with salary expectation will gladly be accepted and reviewed. Please send them to hr@linengineering.com or call 408.919.0200x228 to inquire.
]]> 2008-09-03T15:45:50-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/sby/mnu/825984738.html text 2008-09-03T15:45:50-07:00 http://sfbay.craigslist.org/sby/mnu/825954332.html OUR COMPANY
Nitrex is a rapidly growing international company and one of the world leaders in developing heat treating technologies and equipment. With five metal heat treating locations in the United States including a new facility in Las Vegas, NV, Nitrex is growing and in need of additional staff. This job posting is with respect to a position in our San Jose, CA facility which specializes in the heat treatment of aerospace components. The San Jose facility holds AS9100 and NADCAP quality certifications. Visit Nitrex at, www.nitrex.com.

SKILLS NEEDED
• Able to learn and adapt to several different types of tasks;
• Familiar with manufacturing procedures and instructions;
• Able to perform detailed work with pride in quality of work output;
• Able to produce a high volume of work output;
• Follows safe work practices;
• Ability to read and understand Quality System procedures;
• Additional skills that would be a plus:
o Familiar with the operation of temperature controllers
o Familiar with metal heat treating or metal part processing
o Familiar with machining
o Ability to read & understand blueprints

DUTIES
• Acts as shift supervisor when the shift supervisor is unavailable or absent;
• Capable of creating programs on programmable temperature controllers;
• Capable of directing and monitoring the work of Heat Treat Helpers when necessary;
• Capable of scheduling and coordinating the processing of jobs with available equipment, required cycles and due dates of orders;
• Adheres to company safety policy and procedures;
• Performs work in compliance with company AS9100 and NADCAP quality systems;
May perform some of all of the following duties:
• Assist in the packing or unpacking of customer parts;
• Verify count and condition of parts with Purchase Orders and during various stages of processing;
• Clean parts in solvent or process parts in a parts washing machine;
• Apply masking paint to specific areas of parts;
• Load parts on racks for optimum processing and minimal distortion;
• Sandblast parts in specified areas only;
• Straighten parts to customer specifications;
• Performs hardness testing of parts to verify proper processing or condition of parts;
• Operates various furnaces and related equipment such as forklifts, cranes, & programmable controllers;

MINIMUM QUALIFICATIONS
• High School graduate. Technical School courses or a 2-year Technical Degree would be a plus for advancement;
• A minimum of 3-years relevant work experience;
• Experience with heat treating or the operation of industrial furnaces would be advantageous;
• Good reading skills and the ability to understand and follow Quality System procedures;
• Ability to work in the U.S. for any employer;
• Ability to start within two to four weeks.

CHARACTERISTICS
• Positive can-do attitude
• Energetic worker with sense of urgency
• Detail Oriented
• Good Communication Skills
• Team Oriented





]]> 2008-09-03T15:25:05-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/sby/mnu/825954332.html text 2008-09-03T15:25:05-07:00 http://sfbay.craigslist.org/pen/mnu/825929340.html Location: South San Francisco / Richmond
Salary: $50K + Benefits

Job description:

Hands-on management and overseeing of food preparation and packaging.
Supervision of food preparation and packing teams.

Main responsibilities:

• Supervise and fulfill all production orders
• Supervise Food Preparation Team to complete food preparation per recipes.
• Supervise Food Packing Team to efficiently and safely pack and fill orders.
• Follow Production Schedule and Work Lists
• Follow all Quality Assurance, safety and sanitation guidelines including HAACP.
• Follow cleaning and maintenance schedules for production equipment.
• Management of employee work schedules including attendance, breaks and overtime.
• Managing employees to adhere to Good Manufacturing Practices.
• Communicate with Planner, Production Chef and Fulfillment Supervisor.
• Communicate with Purchaser on inventory control and report needs or oversupply.

Requirements:

• 3 years of experience in a food production/manufacturing facility.
• Must be extremely reliable, punctual, disciplined and possess strong work ethics.
• Safety and Sanitation conscious.
• Organized with strong communication skills
• Ability to lead, manage and motivate a diverse crew.
• Team player, work well with others.
• Strong Math, Analytical, Computer, and Excel/Word skills.
• Bilingual preferred (English/Spanish).

About Us:
We are the Real Good Project. Our mission is to provide beautiful food that makes people happy and healthy. We make incredible tasting prepared and crafted food using only fresh and organic ingredients.
We are currently operating from our facility in South San Francisco while we are building a new production facility in Richmond. Please take this into consideration when applying. There is great opportunity for growth and advancement within our company.

How to apply:

Please attach your resume with cover letter and references to email. No faxes or phone calls please.

We look forward to hearing from you.
]]> 2008-09-03T15:08:09-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/pen/mnu/825929340.html text 2008-09-03T15:08:09-07:00 http://sfbay.craigslist.org/sby/mnu/825900913.html
Pre employment physical and drug screen required.

WE ARE AN EQUAL OPPORTUNITY EMPLOYER

FAX RESUME TO (408) 364-7217]]> 2008-09-03T14:48:38-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/sby/mnu/825900913.html text 2008-09-03T14:48:38-07:00 http://sfbay.craigslist.org/sby/mnu/825878245.html
Fax Resume to 408-364-7217.

WE ARE AN EQUAL OPPORTUNITY EMPLOYER]]> 2008-09-03T14:33:50-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/sby/mnu/825878245.html text 2008-09-03T14:33:50-07:00 http://sfbay.craigslist.org/sby/mnu/825870722.html Regular Full-Time Position
Grave Shift

Responsibilities include but not limited to:
• Process PCB’s through the Lay-up & Press operations.
• Ability to use various hand tools for various measurement requirements.
• Must meet all department quality and throughput requirements as well as follow all company policies and procedures.
• Must be flexible in working in various departments as needed and support overtime needs.

Position Qualifications:
• Awareness of ISO 9001 standards is preferred.
• Must have a minimum of 3 years of experience in Lamination.
• Must have good communication skills and able to speak, read, and write in English.
• Knowledge of Lauffer and OEM Press equipment.

Education/Training:
• High School Diploma or higher education preferred but not required.

Physical Requirements:
• Must be able to lift up to 50lbs.
• Must be able to stand for long periods of time.

Personal Attributes:
• Must be a self motivated individual who performs a high quality job.
• Must have good attendance and punctuality.
• Detail and results oriented.
• Work independently.
• Must have good visual skills for processing fine detailed work and be able to stand for long periods of time.
• Knowledge of basic math.
• Conscientious, committed to a high standard of personal and professional ethics.
• Ability to work in a fast paced environment.

]]> 2008-09-03T14:29:05-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/sby/mnu/825870722.html text 2008-09-03T14:29:05-07:00 http://sfbay.craigslist.org/eby/mnu/825829121.html
Our growth as a supplier/partner in multiple industries, medical, automotive, electronics, has allowed us to concentrate and build our core competencies - customer service, engineering and design, tooling design, build and maintenance, program management, and contract manufacturing including secondary operations such as sonic welding, along with clean room molding and packaging.


We are currently seeking for :

Maintenance Technicians- Injection Molding/Plastics Experience!!!!!


To qualify, you must have experience with the following: installing equipment, troubleshooting electrical, mechanical, pneumatic and familiarity with PLC’s. Working with Injection molding-plastics – a BIG plus!!!!!

Responsibilities include providing emergency/unscheduled repairs during production, troubleshooting & resolving equipment problems, performing scheduled preventative maintenance and general injection mold maintenance.


This is a fast paced environment and dependability is essential for this position. Must be able to work independently & as part of a team. Good communication skills with the ability to work with supervisors, managers and line operators. Must be flexible.


The purpose of this position is to provide preventative maintenance, planned maintenance, troubleshooting and repair of all of the plant facilities, plant property and production equipment. This position will be on call periodically and is expected to be able to respond in a timely manner when the need arises. This position must be able to resolve all mechanical and technical issues that occur on shift in a safe and logical manner.



KNOWLEDGE, SKILLS AND ABILITIES REQUIRED:

· High School Diploma or GED

· 2-4 years demonstrated maintenance working in a manufacturing environment.

· Sound electrical and Mechanical skills: welding and burning proficiency.

· A good understanding and commitment to preventative maintenance activities.

· The ability to learn and understand maintenance software and utilizing of work orders, parts procurement, inventory control and location.

· Effective communication skills (reading and writing), interpersonal and organizational skills.


We are an Equal Opportunity Employer. We offer a competitive benefits package, medical, dental, 401K & life insurance. Pre-employment Drug Testing.
]]> 2008-09-03T14:01:57-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/eby/mnu/825829121.html text 2008-09-03T14:01:57-07:00 http://sfbay.craigslist.org/eby/mnu/825819606.html Please fax resume to 209-825-4094 or email]]> 2008-09-03T13:55:51-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/eby/mnu/825819606.html text 2008-09-03T13:55:51-07:00 http://sfbay.craigslist.org/sby/mnu/825726566.html We have an immediate opening for the position of Journeyman Vacuum Welder. Must be able to pass AWS welding certifications. We offer competitive salaries commensurate with experience, plus overtime. We also offer medical and dental health insurance, 401k, paid vacation and holidays.

Requirements

- Minimum 10 to 15 years experience required.
- Must pass AWS D1.1, D1.2 and D1.6 welding requirements.
- Must know vacuum leak checking and presure testing.
- Full time, day shift 6am to 2;30pm.
- Must pass drug test.
- Must have good communication skills.
- Must be dependable and on time.
- Must be able to react to change productively.
- Must have excellent blueprint reading skills.

Qualified applicants plese respond to this email or fax resume to (408) 946-0555.
]]> 2008-09-03T12:56:48-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/sby/mnu/825726566.html text 2008-09-03T12:56:48-07:00 http://sfbay.craigslist.org/eby/mnu/825691449.html
The Director of Operations will be responsible for the operation of the pilot solar cell production line. The successful candidate will work with the R&D team to establish the first pilot solar cell production line, and fan out the production scheme to overseas volume production lines.

The position requires extensive experience in a solar cell production line or semiconductor fab startup. More specifically, particular experiences in fab facility construction and supply chain management (including production equipment selection). The job scope includes design and construction of the production facility, production tool selection, and capacity ramp up, yield enhancement, cost reduction, quality assurance and supply chain management.

Qualifications:

• MS in EE and an MBA preferred.
• Strong functional expertise
• Self-directed and driven, with a good sense of humor
• Ability to develop and lead a team.
• Strong character and integrity.

Sierra Solar Power, Inc. manufactures and markets thin-film photovoltaics which help in the direct generation of electric power from sunlight. The company was founded in 2007 and is based in Fremont, California. For further information, please visit: www.sierrasolarpower.com.

Benefits:

• Competitive Compensation Package including Stock Options
• Medical (Anthem Blue Cross of CA - HSA Lumenos, PPO, HMO)
• Dental (Delta Dental)
• Vision (VSP)
• Long-Term Disability Insurance
• 401k Plan
• Paid Time Off: Fifteen (15) days per calendar year
• Eleven (11) recognized company holidays

If interested, please forward your resume to Charles Zamora at czamora@acgglobal.us
]]> 2008-09-03T12:35:43-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/eby/mnu/825691449.html text 2008-09-03T12:35:43-07:00 http://sfbay.craigslist.org/pen/mnu/825662357.html
Your big-picture strategic business planning will complement the day-to-day implementation of action plans to support the financial and operational goals. You will bring the above experience and at the same time be a collaborative team-player. This is a great opportunity to lead an entrepreneurial growth company; have a significant impact on its success and take it to its next level of growth and profitability.

About us: Advantage Enterprises, a 17 year old specialty outsourcing company provides managed print services to the nation’s leading law firms, technology companies and more. In addition, we supply our manufactured toners for our leased equipment and deliver ASP service, all in a bundled package.

Essential duties and responsibilities:
Management of all aspects of a national service distribution with profit and loss responsibility
General Management of: communication systems& training; production; field operations; distribution; call center; purchasing and inventory, account management and information technology
Coordination of departmental efforts and company synergy
Leadership of people management through goal and task setting
Training of department managers for their supervisory roles
Conducting employee performance reviews
Ongoing communication with the owner of significant successes, challenges and risks

Education:
Undergraduate degree; MBA preferred

Experience and Skills:
A minimum of seven years of management in manufacturing or service related experience
Experience with P&L responsibility and understanding of basic accounting
Business philosophy in alignment with Company Core values
Experience with organizational development and strategic planning
Process oriented; ability to design flowchart and identify logic flaws
Strong verbal and written communications skills
Excellent organizational skills and high attention to details and follow through
Ability to delve into details while maintaining the vision of the big picture
Ability to meet deadlines and experience in a deadline-driven culture
General IT management skills preferred

Send cover letter, salary requirement and resume to: aegm_job@yahoo.com


]]> 2008-09-03T12:18:29-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/pen/mnu/825662357.html text 2008-09-03T12:18:29-07:00 http://sfbay.craigslist.org/eby/mnu/825527925.html
1. Responsible for setup, operating and tool adjustments for a variety of conventional and CNC machines, primarily CNC lathe. SurfCam programming preferred but not required.
2. Works from blueprints and process sheets to perform production tasks, which may include the cutting and shaping of metal to precision dimensions.
3. Checks and inspects machining operations against specific tolerances.
4. May identify and repair minor machine malfunctions.
5. Keeps traceability of all material/parts being processed.
6. Completes required process control sheets together with material/part.
7. Interfaces with other manufacturing personnel on progress of assigned tasks.
8. Notifies appropriate personnel of problems with material, process, or delivery schedule.
9. Performs other duties as assigned.

If selected, you will work on assignments that are semi routine in nature where ability to recognize deviation from accepted practice is required. You will normally receive general instructions on routine work, detailed instructions on new assignments.

Education and Skills
1. High School Diploma or equivalent.
2. Must have a minimum of 3-4 years’ machine shop experience or on- the- job training / trade knowledge equivalent to training received in a formal apprenticeship program.
3. Machine shop experience should include CNC machines, ability to add and subtract decimals and fractions on drawings and measuring instruments such as calipers and scales.
4. Must be able to use basic hand tools normally associated with mechanical assembly and test.
5. Must be able to communicate verbally with fellow employees as well as management personnel using English as the primary language.
6. Knowledge of GD&T.
7. Must be able to perform all duties of a Machine Operator with sustained use of appropriate safety devises such as but not limited to respirators.
8. Working knowledge of Beryllium products desired but not required.

The intent of this job description is to provide a representative summary of the major duties and responsibilities performed by incumbents of this job. Incumbents may be requested to perform job related tasks other than those specifically presented.

Please submit cover letter and resume by:
Fax: (510) 623-7600 (Attn: Human Resources)
E-Mail: Electrofusion@BrushWellman.com (put "CNC Lathe Programmer / Operator" in the subject line)

Brush Wellman - Electrofusion Products is an Equal Opportunity Employer.]]> 2008-09-03T11:01:28-07:00 en-us Copyright © 2008 craigslist, inc. http://sfbay.craigslist.org/eby/mnu/825527925.html text 2008-09-03T11:01:28-07:00 http://sfbay.craigslist.org/sby/mnu/825499450.html